|
|
UNIVERSAL TIMER - UT2003
- PICmicro 16F628 based
- 4 numbers of 7 segment display
- 4 programming keys
- 1 SPDT relay output
- Mains failure detection in 10mS +
2mS
- Internal EEPROM Memory backup
- Auto (power on) / Manual (key)
start
- Start with ON or OFF cycle
- No. of cycles programming (max
99)
- Selectable time base for ON and OFF
cycle
- Time base HHMM, MMSS, SSMS
- Size W 80 mm X L 75
mm
|
|
|
FREQUENCY MONITOR -
FM2003
- PICmicro 16F628 based
- 4 numbers of 7 segment display
- 4 programming keys
- 1 SPDT relay output
- 40 to 60 Hz with 0.1 Hz
resolution
- Trip delay time programmable from 1 S to 99
S
- Deviation alarm indication on
display
- Size W 80 mm X L 75
mm
|
|
 |
UNIVERSAL BLIND TIMER - BL2003
- PICmicro 16C72A based
- 2 numbers of 8 way DIP switch
- 1 SPDT relay output
- Auto / Manual (external trigger)
start
- Start with ON or OFF cycle
- CYCLIC or ONE SHOT TIMER
- No. of cycles programming (max
127)
- Independent time base for ON and OFF
cycle
- Time base HHMM, MMSS, SSMS
- Size W 82 mm X L 76
mm
|
|
 |
CURRENT SENSOR - CS2003
- PICmicro 16F870 based
- Designed for 75mV shunts
- FULL SCALE up to 200 A setting
- HIGH and LOW trip limit setting
- WARM UP delay setting up to 99
seconds
- FAULT trip delay setting up to 99
seconds
- Tripping RELAY
- 96 mm x 96 mm DIN ABS plastic
enclosure
|
|
|
EMBEDDED MODULE -
EM001
|
Power supply |
8 to 15 Vac |
|
Analog inputs |
3 nos. @ 10 bits, 0 - 10
Vdc |
|
Analog outputs |
2 nos. @ 8 bits, 0 - 5
Vdc |
|
Digital inputs |
4 nos. opto
isolated |
|
Pulse input |
1 no. opto isolated |
|
Relay outputs |
4 nos. SPDT |
|
EEPROM |
64 bytes |
|
Control |
RS232 / RS485 serial
interface |
|
RS485 addresses |
upto 64 |
|
Size |
150 mm X 100
mm |
Applications
Data Acquisition, Monitor and
Control |
|
 |
ISOLATED RS485
DRIVER MODULE
|
LINE SIDE |
|
|
Power supply |
8 to 15 Vac |
|
Driver chip |
75176 |
|
Isolator |
6N136 |
|
|
|
uC SIDE |
|
|
Power supply |
+ 5Vdc and GROUND |
|
Lines |
TX, RX and TR
(direction) | |
|
RS485 BASED RELAY
CONTROL
|
Power supply |
8 to 15 Vac |
|
Relay |
1 no. SPDT |
|
Interface |
RS232 and RS485 |
|
Address |
255 |
|
Input |
1 no, from relay or
external |
|
Application |
MODBUS based
control | |
|
 |
ANUNCIATOR
|
Power supply |
230 Volts AC |
|
Input |
Potential free or 0 to
12VDC |
|
Output |
Beeper and Siren |
|
Channels |
2 nos. |
|
User configuration |
Trigger Logic Low
Trigger Logic High
Contineous Siren
Intermittent Siren
Auto reset |
|
Application |
Industrial
Annunciator | |
 |
FAN / AIR CONDITIONER
CONTROLLER
|
Power supply |
0 - 8 Vac |
|
Sensor |
LM35 - 10 mV / °C |
|
Outputs |
SPDT Relay and
TRIAC |
|
Display |
2 numbers, 7
segments |
|
LED indications |
Relay and TRIAC
status |
|
Programming keys |
2 numbers |
|
Recycle time |
3 minutes |
|
Modes |
FAN or AC mode
selectable | |
|
|
4 DIGITS RPM INDICATOR /
UP-DOWN
COUNTER
|
Power supply |
0 - 8 Vac |
|
Input |
Proximity sensor |
|
Displays |
4 numbers, 7
segments |
|
Keys |
2 numbers, Mode select and
Reset |
|
Modes |
RPM or
COUNTER | |
